Meters that are regularly calibrated by us should give reliable results. Getting an unexpected claim does not always mean that your meter is wrong but is an indication that something may be wrong.
A good way of ensuring that your meter is correct is to purchase known calibration standards from us (part No 1900-6352), and check your meter against them regularly throughout the harvest. At the first sign that your meter is incorrect contact the Sinar Technology Service Centre and we will help you solve the problem.
Checking your meter against another meter of different manufacture and unknown accuracy is not recommended as this can give misleading & confusing results.
By this do you mean how do we set the initial calibration for a commodity or how do we calibrate an instrument when it’s back for service or repair?
If it’s the former, then over the last 20 years or so, each harvest we’ve collected samples of all the commodities we measure with our meters and oven tested them. The results of these tests are then used to adjust the programming within the meters to make the results you get more robust with time.
If it’s the latter, then firstly we calibrate the hardware to ensure that the mechanics and the electronics are performing to their specifications. Then we check that the moisture results are within specification against a range of known calibration standards. Finally we put each instrument through a final check procedure with a different set of oven tested, calibration standards to confirm the calibration.
Thank you for allowing Accurate Weighing Scales (U) Ltd the privilege to serve you in advance.
For inquiries on deliveries contact us
Office +256 705 577 823, +256 775 259 917
Address: Wandegeya KCCA Market South Wing, 2nd Floor Room SSF 036
Comments